Is It A Wood or Gas Fire?
Patented Ember-Fyre Burner Technology

We feature the patented Ember-Fyre burner system in both the 32 DVS and 34 DVL gas fireplace inserts. Popular Science magazine awarded the prestigious “Best of What’s New” award to the Ember-Fyre as one of the year’s top achievements in Science and Technology. The combustion system delivers and efficiency up to 82.2%. Unlike other gas burners, the pilot is hidden. There are no unsightly burner tuber or metal pans and the appearance of the fire and glowing embers are just as beautiful on the low flame setting as they are on high. The level of realism is so remarkable it is difficult to tell apart from our wood burning appliances.

The Most outstanding feature of these gas stoves and fireplaces is the realism and efficiency (86.5 %!) of the Ember Fyre burner. When natural gas (or propane) reaches the appliance, it is piped into a high quality European SIT gas valve. This valve has a variable turn down rate . The valve steps the pressure down and the lower pressure gas flows from the valve into the burner orifice. The orifice is a small opening specially designed and machined to allow a precise gas flow into the mixing tube. The fuel/air mixture is a one time adjustment using the air shutter control. This air control shutter allows the stove installer to compensate for variations in altitude, fuel type and line pressure.
Unique to the Ember Fyre burner, the combustion air is drawn from outside the house via the direct vent flue. This air is preheated and drawn into the lower portion of the sealed firebox. A portion of this air is drawn directly into the mixing tube. This gas/air mixture flows toward the lower burn chamber. The burn chamber is a hollow area formed between a metal pan and the Ember Fyre (patented) burner. From the sealed chamber the mixture flows through a unique set of precise burner ports. There are no visible burner tubes or steel grill components that you would normally see in a typical gas stove or fireplace.

As this mixture ignites and burns, the Ember Fyre burner heats to a deep red 1200* F, realistically mimicking the look of burning wood embers. The hard-carved ceramic logs have the appearance of partially burned wood and glow a deep red and orange. Dancing yellow flames further enhance the look and feel of a real wood fire.

You, your family and your guests will enjoy the warmth and glow of our gas inserts. taking the chill off a winter evening becomes more enjoyable with a glowing flame in your efficient insert.

We have extensive displays of both wood and gas inserts in our Gilroy showroom at 6205 Engle Way (408-842-6570) and our showroom in San Carlos at 1300 Industrial Road, #17 (650-593-1496. Come on in and get out of the cold!

For further directions or more information, visit our website at www.energy-house.com.

Comments are closed.